H Regulate Humidifier
Product Name : H Regulate Humidifier
Model : H
Class:humidifier
Price :Please call
Last update : 2018.04.13
Manufacturer : H3A/H3C/H6A/H6C/H9A/H9C/H12A/H12C, industrial humidifier, humidification machine automatic water, size adjustable, with manual control and automatic control, machinery for the stainless steel shell, total internal waterproof circuit, small volume, low cost, large humidifying quantity, can be used for small industrial
View Big Picture

Gas special ultrasonic humidification machine product introduction

 

  HIMEJU QT series gas special ultrasonic humidification machine, a total of three kinds of humidifying capacity for you to choose from, and three kinds of control methods to meet your needs. The series of nine kinds of models, respectively.

 

Control mode

1.8KG Fog quantity

3KG Fog quantity

6KG Fog quantity

Manual

QT-1.8

QT-3

QT-6

Time

QT-1.8S

QT-3S

QT-6S

Humidity

QT-1.8Z

QT-3Z

QT-6Z

 

 

  Gas special ultrasonic humidifier atomization box and the power supply box adopts a split wall hanging type design, atomization box adopts stainless steel sealed structure, equipped with standard for water, water discharge switch and overflow, which give water automatic supply water. Gas special ultrasonic humidification machine according to the different ways of control, is divided into three types : the manual switch control mode (model without letters ), the user can according to their need to single or multiple work independently, can also be multiple combinations of centralized control; digital timing controller automatic cycle control ( model with the letter "S" ), the automatic cycle control cycle, from one minute to ninety-nine hours, arbitrarily set the working time and stop time, set up can work continuously ; the digital humidity controller automatic control ( model with the letter "Z" ), humidity controller can range from 1%RH-100%RH arbitrarily set control accuracy of 5%RH devices can be within the set values automatically. Gas special ultrasonic humidification machine inlet interface for a 110mmPVC line directly connected to the gas, mist interface for a 110mmPVC line, with a certain distance line access of gas.

 

  Gas special ultrasonic humidification machine adopts integrated atomizer, and with a waterless protection device, the fog particle diameter of only 1-10 u, can quickly make water atomizing mist, so long time suspended in the air, gas special ultrasonic humidification machine without mechanical drive, no noise, no pollution, atomization efficiency high, low failure rate, low energy consumption, easy maintenance, high efficiency, reliable and practical gas special humidification equipment.

 

 

Picture3-1

 

 

 

 

Gas special ultrasonic humidification machine installation and use

 

 

  When you purchase this product, remove the outer packaging, such as Picture3-1, the equipment support is fixed on the desired humidified gas outside the wall, the two bracket fixed distance and equipment supporting angle. Match and should guarantee level, then the device is fixed on the bracket above the air inlet interface in device connected than 110mmPVC. Material line access within the library, and sealing treatment, spray interface the connected pipeline diameter 110mmPVC material, the same access within the library, do to seal the deal. Then according to the gas humidification, uniformly distributed spray pipe the mist outlet, so that the spray distribution uniformity.

 

 

  Installation of pipeline, attention should be paid to gas extraction and gas input pipeline two should keep certain distance and difference. The spray orifices near terminal equipment should be less than the tube road equipment terminal 1cm, in order to make condensation reflux. After installation, the softened water interface via the water interface of connected to equipment, check the water switch will have closed, open the water supply switch, water pressure should be consistent with the requirement of equipment, the equipment automatic control water, control water level is maintained in the minimum working above water, when the water level higher than 120 mm, from which water will overflow we will automatically send out.

 

 

  Finally, put the power socket to ~ on the 220V power source, the power should be larger than the device power consumption, power should be grounded, to ensure safety. Manual control device in series, the power switch is turned on it, then can be start to work. S series equipment, the power switch is turned on and set the device, controller, and began to work. Z series of equipment should be first humidity sensor probe ( sensor probe attention earthquake) is installed in the gas in the appropriate locations, then the sensor connection fixed, sensor plug is inserted in the equipment humidity control socket, the power switch is turned on and set the device, controller, and began to work.

 

 

 

Gas special ultrasonic humidification machine environment

 

 

Ambient temperature

1-40℃

Ambient humidity

≤90%RH

Feed water quality

Tap water

Water temperature

1-30℃

Water pressure

1-3KG/CM3

The surrounding environment

No high temperature radiation source

 

 

Gas special ultrasonic humidification machine technical parameters

 

 

Model

fog amount

air volume change

import pipeline

power

power

NW

size

Kg/H

M3/H

mm

V/Hz

AV

Kg

cm

QT-1.8

1.8

175

2x110

220/50

180

15

53x40x25

QT-3

3

175

2x110

220/50

300

18

53x40x25

QT-6

6

175

2x110

220/50

600

22

53x40x25

QT-1.8S

1.8

175

2x110

220/50

180

15

53x40x25

QT-3S

3

175

2x110

220/50

300

18

53x40x25

QT-6S

6

175

2x110

220/50

600

22

53x40x25

QT-1.8Z

1.8

175

2x110

220/50

180

15

53x40x25

QT-3Z

3

175

2x110

220/50

300

18

53x40x25

QT-6Z

6

175

2x110

220/50

600

22

53x40x25

 
QT Gas special humidification machine real photo
| Clicks:
Service
QQ:
QQ:
BUY